VU+ Solo 2 (Dual 1,3GHz)


Codice prodotto 218
Categoria Zone out of production
Marca Vu+
Prossimi arrivi -
N. pezzi in arrivo -
Disponibilità altri pezzi previo ordine no

Segnala ad un amico

Altre domande ?

1300 MHz MIPS processor

256MB Flash


Gigabit Lan

1 x DVB Common-Interface Slot

2 x Smart Card Reader (Xcrypt)

3 USB ports (1x front, 2x rear)

SPDIF optical audio output (digital)

1 x HDMI 1.4 video / audio output (digital)

1 x Scart (TV)

1 x RCA video output

2 x audio output (L / R) RCA (analog)

Plug and Play support for 2.5" SATA - Hard Drives

unlimited channel lists for TV / Radio

EPG (electronic program guide) support

Support of Bouquet lists

OSD in many languages and skin-support

automatic / manual channel search

DiSEqC 1.0/1.1/1.2, USALS

External 12 volt power supply

Power switch


VU+ Solo2 Specifications:


DVB-S2 tuner:

Input frequency range 950 .. 2150 MHz

Signal Level - 65 dBm ... - 25 dBm

Tuner Input Connector F-Type female

Input impedance 75 ohms

AFC + / - 3.5 MHz

QPSK and 8PSK demodulation

FEC Viterbi and Reed-Solomon

Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9

Roll-off Factor 35% Common-Interface:

Common-Interface Power Consumption max. 0.35 A/5V video decoding:

Video Compression MPEG-2 / H.264 and MPEG-1 compatible

Video Standard PAL G / 25 Hz, NTSC

4:3 / 16:9

Letterbox for 4:3 TV-Device Output Digital:

Output Level 0,5 Vss on 75 Ohm

Frequency: 32 kHz, 44.1 kHz, 48 kHz

S / PDIF optical, coaxial (AC3) audio decoder:

Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3

Audio Mode Dual (main / sub), Stereo

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:

Output Level L / R 0,5 Vss on 600 Ohm

THD> 60 dB (1 kHz)

Crosstalk <-65 dB Video parameter:

Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm TV Scart:

Output: FBAS, RGB, Ethernet over OSD:

1000/100/10 MBit compatible interface USB:

USB 2.0 connector (3x) LNB power and DVB-S2 Tuner:

LNB Current 400mA max. , Short-circuit proof

LNB Voltage horizontal "no load 19.5 V" 17.6 V at 400mA

LNB Voltage vertical "no load 14.5 V" 11,8 V at 400mA

LNB is switched off in the standby mode, control of the satellite position:

DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control Power consumption:

<13W (in operation, with LNB)

<12W (in operation, without LNB)

<0.5 W (Deep-Standby-Mode) Input voltage:

External power supply:


110-240V AC / 50-60Hz / 1,0 A


12V = / 3,5 A


Further information on VU+ Solo2:


Ambient Temperature +15 ° C. .. +35 ° C

Humidity <80%

Dimensions (W x D x H): 280 mm x 200 mm x 50

Weight: 2.0 kg without HDD


Please Note: This box is offered for sale to competent enthusiasts with knowledge of networking, FTP, and Telnet/SSH.


Vu+ Control Centre V0.5

Available to Download Now!


Telnet Client

FTP Client

Media File Manager

HDD Manager

Settings Backup

Upload Channel List

Web Interface

IPK Installer.

Driver Manager.

Android: No
Common Interface: Si
Enigma2: Si
Lettore smartcard: Si
Linux: Si
Tuner DTT: No
Tuner SAT: Si
Wifi Ready: Si
Xbmc: No

Gli utenti registrati possono condividere la loro esperienza avuta con questo prodotto/servizio. Registrati per accedere a tutti i benefici riservati agli utenti registrati o clicca su login se sei già registrato.